Conventional Fire Alarm System

Description

• Ideal alarm system for small set-ups
• Identifies the zone in which the fire incidence has occurred
• A technological advantage over standalone detectors
• Detection devices are designed to detect actual fire instances only, decreasing the chances of fire alarms
• One of the most cost effective alarm solution
• Simple setup, no configuration required

Product Overview

The conventional fire alarm system is a time-tested fire alarm system; this makes it one of the most reliable systems for ensuring fire safety of a premises. The Ceasefire’s Conventional Fire Alarm System is a state-of-art system which comprises of a control panel and a range of fire detectors and devices interacting with it.

The conventional system divides the premises into distinct zones. Each zone has its own set of detectors & alarm systems.

The detection & alarm devices are spread across the premises and catch the early signs fire. In case of a fire incidence the system identifies the zone in which the fire has occurred.

Product Features

• Fully certified to BS EN54-2 and BS EN54-4
• 2-wire and standard versions in 2,4 or 8 zones
• Compatible for use on BS5839: Part 1: 2013 installations
• 2-wire repeaters and ancillary boards
• Fully programmable
• Simple, single board construction
• Installer friendly
• Compatible with wide range of detection devices
• Two monitored sounder outputs
• 3 Amp power supply
• Auxiliary power output

Technical Specification

Features	2 Zone Conventional Panel	4 Zone Conventional Panel	8 Zone Conventional Panel	2 Zone Conventional Repeater Panel	4 Zone Conventional Repeater Panel	8 Zone Conventional Repeater Panel
Enclosure	1.2mm Steel	1.2mm Steel	1.2mm Steel	1.2mm Steel	1.2mm Steel	1.2mm Steel
Operating Temperature	–5°C to +50°C	–5°C to +50°C	–5°C to +50°C	–5°C to +50°C	–5°C to +50°C	–5°C to +50°C
Operating Humidity	Cable Entries (20 Mm Knockouts): 12 × top, 12 × top rear, 1× lefthand side, 1 × right hand side	Cable Entries (20 Mm Knockouts): 12 × top, 12 × top rear, 1× lefthand side, 1 × right hand side	Cable Entries (20 Mm Knockouts): 12 × top, 12 × top rear, 1× lefthand side, 1 × right hand side	—	—	—
Supply Voltage	230V AC (+10% / –15%)	230V AC (+10% / –15%)	230V AC (+10% / –15%)	230V AC (+10% / –15%)	230V AC (+10% / –15%)	230V AC (+10% / –15%)
Power Supply Dc Rating	24V 3A	24V 3A	24V 3A	24V 3A	24V 3A	24V 3A
Battery Capacity	7Ah 12V (2 per panel)	7Ah 12V (2 per panel)	7Ah 12V (2 per panel)	—	—	—
Number Of Fire Zones	2	4	8	2	4	8
Sounder Outputs	2 × 0.5A (max 1.6A over all outputs)	2 × 0.5A (max 1.6A over all outputs)	2 × 0.5A (max 1.6A over all outputs)	2 × 0.5A (max 1.6A over all outputs)	2 × 0.5A (max 1.6A over all outputs)	2 × 0.5A (max 1.6A over all outputs)
Contact Rating (Fault / Local Fire / Fire)	30V DC 1A	30V DC 1A	30V DC 1A	—	30V DC 1A	30V DC 1A
Detection Zone Current	1.6mA	1.6mA	1.6mA	1.6mA	1.6mA	1.6mA
Detection Zone End Of Line Resistor	6.8k ohm 5%	6.8k ohm 5%	6.8k ohm 5%	6.8k ohm 5%	6.8k ohm 5%	6.8k ohm 5%
Sounder Output End Of Line Resistor	10k ohm 5%	10k ohm 5%	10k ohm 5%	10k ohm 5%	10k ohm 5%	10k ohm 5%
Contact Rating (fault / Local Fire / Fire)	—	—	—	30V DC 1A	—	—
Detection Zone Current	—	—	—	1.6mA	1.6mA	1.6mA
Weight	5.5Kg	5.5Kg	5.5Kg	5.5Kg	5.5Kg	5.5Kg
Dimensions (mm)	385(W) × 310(H) × 92(D)	385(W) × 310(H) × 92(D)	385(W) × 310(H) × 92(D)	385(W) × 310(H) × 92(D)	385(W) × 310(H) × 92(D)	385(W) × 310(H) × 92(D)

 

 

Features	Photoelectric Smoke Detector	Combined Heat Detector	Conventional Beacon	Combined Sounder/Strobe	Conventional Call Point	Beam Smoke Detector	Mounting Base
SKU No.	1CD1101	1CD1102	1CD1212	1CD1207	1CD1201	1CD1301	1CD1106
Disposable Chamber	Yes	—	—	—	—	—	—
Operating Voltage	9.5 – 30 Vd.c.	9.5 – 30 Vd.c.	17 – 41Vd.c.	9 – 30 VDC	—	15 – 33Vd.c.	—
Quiescent Current (typ)	35m A	35m A	4.3μA (5.0μA max)	—	—	240m A	—
Maximum Current Alarm	40mA	40mA	—	—	—	50mA	—
Remote Indicator Drive	20 mA(max) / 9.5 – 14mA (typ)	20 mA(max) / 9.5 – 14mA (typ)	—	—	—	—	—
Operating Temperature Range	–10°C to +50°C	–10°C to +50°C	–10°C to +50°C	–20°C to +60°C	–10°C to +50°C	–10°C to +50°C	–10°C to +50°C
Storage Temperature Range	–30°C to +60°C	–30°C to +70°C	–30°C to +60°C	—	–30°C to +70°C	–30°C to +70°C	–30°C to +60°C
Maximum Humidity	95%RH – Non- Condensing (at 40°C)	95%RH – Non- Condensing (at 40°C)	95%RH – Non- Condensing (at 40°C)	75%RH – Non Condensing (at 40°C)	95%RH – Non- Condensing (at 40°C)	95%RH – Non- Condensing (at 40°C)	95%RH – Non- Condensing (at 40°C)
Ingress Protection Rating	Ip42	Ip63	—	—	Ip24	—	—
Colour / Case Material	Ivory White / ABS	Ivory White / Polycarbonate	Ivory White / ABS	—	Red / ABS	Ivory White / ACS	Ivory or White / ABS
Weight (g)	95	—	88	—	(Flush Mount) 110 (Surface Mount with Back Box) 161	(Receiver) 685 (Emitter) 600	—
Compatible Bases	CF-YBN-R/6, CF-YBO-R/6R, CFYBO- R/6RS, CF-YBN-R/6SK, CFYBO- R/6RN, CF-YBO-R/6PA	CF-YBN-R6 CF-YBO-R/6R CFYBN- R/6SK CF-YBO-R/6RS CFYBO- R/6RN CF-YBO-R/6PA	—	—	—	—	—
Base Heights (mm)	8, 13	8, 13	—	—	—	—	—
Base Fixing Centres (mm)	48 – 74	48 – 74	48 – 74	—	—	—	48 – 74
Approvals	LPCB EN54:2000 Part 7	LPCB (EN54:2000) Class A1 & A1R (CFDCD- AE3) Class C & CR (CF-DCD-CE3) Class C & CR (CF-DCD-CE3) (G204045)	—	—	—	LPCB (EN54:12)	—
Lens Colour	—	—	Transparent Red	—	—	—	—
Operating Current	—	—	—	min 46mA (dependant on tone selected) max 70mA (dependent on tone selected)	—	—	9.5 – 30Vd.c.
Nominal Flash Energy	—	—	—	1W	—	—	—
Flash Rate	—	—	—	60 minutes	—	—	—
Maximum Sound Output (at 24vdc)	—	—	—	112dB(A) at 1 metre (dependent on tone selected)	—	—	—
IP Rating	—	—	—	IP45 (with internal back box-as standard) IP66 (with external back box-sold separately)	—	—	—
Nominal Operating Resistance	—	—	—	—	470 ohms	—	—
Operation Range	—	—	—	—	—	5 – 100 (between emitter & receiver)	—
Sensitivity Range	—	—	—	—	—	25%, 50% 60% obscuration (selectable)	—
Line Continuity Options (INT. Kit)	—	—	—	—	—	Schottky / Zener	—
Weight (g)	—	—	—	—	—	—	51
Diameter (mm)	—	—	—	—	—	—	100
Height (mm)	—	—	—	—	—	—	8

 

Features	Mounting Base	IR Flame Detector	Reflective Beam Smoke Detector
SKU No.	1CD1106	1CD1606	1CD1305
Operating Voltage	—	14 – 30Vd.c.	15 – 30Vd.c.
Quiescent Current (typ)	—	—	350μ A
Maximum Current Alarm	—	—	50μA
Operating Temperature Range	-10°C to + 50°C	-10°C to + 50°C	-10°C to + 50°C
Storage Temperature Range	-30°C to + 60°C	–20°C to +65°C	–30°C to +70°C
Maximum Humidity	95%RH – Non Condensing (at 40°C)	95%RH – Non Condensing (at 40°C)	95%RH – Non Condensing (at 40°C)
Ingress Protection Rating	—	IP65	—
Colour / Case Material	Ivory or White / ABS	Blue / Die-Cast Zinc Alloy (Za12)	Ivory White / ABS
Weight (g)	51 g	2 Kg	(Emitter) 700 (Reflector) 50
Approvals	—	—	LPCB BS5839 Part 5 PrEN54 Part 12
Operation Range	—	—	5 – 30
Sensitivity Range	—	—	30%
Line Continuity Options (int. Kit)	—	—	Schottky / Zener
Alarm Current (selected Via By Dil Switched)	—	3 – 28mA	—
Test Signal Voltage	—	14 – 30Vd.c.	—
Relay Contact Ratings	—	Current 1.0A (max) Voltage 50Vd.c. (max) Power 30W (max) (resistive loads only)	—
Field Of View	—	90° min. Cone	—
Operating Wavelength Band	—	IR (0.75 – 2.7mm)	—
Power Up Time	—	2 Seconds (max)	—
Weight (g) / Diameter (mm) / Height (mm)	51 / 100 / 8	—	—
Base Fixing Centres (mm)	48 ~ 74	—	—
Operating Current	9.5 – 30Vd.c.	—	—
Maximum Wire Thickness	2.5mm square Cables	—	—
Diameter	100 mm	—	—
Height	8	—

Application Areas

• Office & Factories
• Schools & Colleges
• Community Centres
• Server Rooms
• Residential Buildings
• Hotels & Restaurants